Bosch FPE-8000-FMR - Displaying List of All Bypassed Elements; Using the Menu; Via the Status Bar; Bypassing;Un-Bypassing Buzzer

52 pt-BR | Bypass
AVENAR panel 8000 | AVENAR panel 2000 |
AVENAR keypad 8000
2023-08 | 8.0 | F.01U.378.877
Manual do utilizador
Bosch Sicherheitssysteme GmbH
A list of various element categories is displayed. The listed number displays the number
of bypassed elements or element groups in the relevant element category.
3. Select the list field you require, e.g. logical zone.
4. Select:
– Inibição Parcial to display all partly bypassed logical zones
– Inibição Total to display all completely bypassed logical zones
Depending on which option you select, all partly bypassed or fully bypassed logical zones
will be displayed. The number in parentheses, e.g. (5) specifies the number of bypassed
elements.
To remove the bypass from all elements in one or more logical zones, select the logical
zone you require and select Repor.
12.4 Displaying list of all bypassed elements
12.4.1 Using the menu
To display a list of all bypassed elements, select the following in the start menu:
1. Inibir Bloquear
2. Inibir
3. Mostrar disp. inibidos
A list of various element categories is displayed. The listed number displays the number
of bypassed elements or element groups in the relevant element category.
4. Select the element category you require, e.g. Detetor .
A list of all bypassed detectors is displayed:
To un-bypass bypassed elements:
1. Select the element you require.
2. Select Repor.
The element is un-bypassed.
12.4.2 Via the status bar
To display a list of all bypassed elements:
1. Select Inibido from the status bar.
A list of various states is displayed.
2. Select Inibido.
A list of various element categories is displayed. The listed number displays the number
of bypassed elements or element groups in the relevant element category.
3. Select the list field you require, e.g. Detector.
A list of all bypassed elements is displayed.
To un-bypass bypassed elements:
1. Select the elements you require.
2. Select Repor.
12.5 Bypassing/Un-bypassing buzzer
In order to prevent an acoustic warning tone being sent to the panel during maintenance
work, for example, the panel's internal buzzer can be permanently bypassed.
To bypass the internal buzzer, select the following in the start menu:
1. Inibir Bloquear
2. Inibir
3. Mais...