To Next PageTo Next Page
Need help?Do you have a question about the Bosch FWA 4630 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | FWA 4630 |
| Category | Wheel Balancers |
| Language | English |
Explains pictograms used for warnings and information.
Guidelines for proper disposal of the FWA 4630 unit.
Information on copyright, liability, warranty, and user obligations.
Crucial instructions for safe operation and connection of the FWA 4630.
Details on EMC directive compliance and potential interference.
Specifies the intended application of the FWA 4630 for wheel alignment.
Overview of the FWA 4630 trolley and its components.
Details about the sensors, including fitting, connection, and operation.
Steps for preparing the measurement bay, including pit and platform checks.
Procedure to check and correct height differences in the pit.
Ensures measuring and working heights are identical on the lifting platform.
Checks to perform on the vehicle before measurement, like tire pressure.
Details on sensor placement on the vehicle.
Instructions on how to position the vehicle correctly on the measurement bay.
Steps for connecting sensors in pit and lifting platform versions.
How to position and connect sensors in a pit setup.
Steps for connecting sensors on a lifting platform.
Procedure for correctly powering the unit on and off.
How to access and use the online help feature.
Information regarding the pre-installed system software.
Steps for safely driving the vehicle onto the measurement bay.
Methods for attaching clamps to the wheel, especially universal quick-action clamp.
Detailed instructions for using the universal quick-action clamp.
How to use the Multiquick clamp, including settings and securing.
Guidance on selecting appropriate plates for different vehicle wheelbases.
Instructions for attaching plates to the clamps and aligning them.
Procedure for performing run-out compensation with the Multiquick clamp.
How to ensure adequate rolling distance for accurate compensation.
Step-by-step guide for the run-out compensation process.
Instructions for attaching and removing the brake clamp.
Procedure for fitting and removing the steering wheel arrester.
Overview of the main function keys (F1-F10) for operation.
Outlines the sequence of program steps in the FWA 4630 software.
Details on customer and vehicle selection, inspection list, and prep operations.
Explains standard, quick, and random measurement procedures.
Detailed steps for standard measurement including run-out compensation.
Describes the quick measurement process with its steps.
Covers general view, additional quantities, and axle values.
Information on version record, unit status, and system settings.
Explains how measured values are displayed, including color coding.
The meaning of colors used to indicate if values are within tolerance.
Example display of measured values for the front axle.
Example display of measured values for the rear axle.
Instructions for cleaning the trolley, plates, and sensors.
How to clean the trolley housing and monitor safely.
Guidance on cleaning the measurement plates.
Instructions for cleaning sensor glass filters and avoiding splashwater.
Table of replacement parts and their order numbers.
European guidelines for the proper disposal of the FWA 4630.
Procedure for checking sensor accuracy using reverse measurement.
Steps for performing the first toe and camber check in the direction of travel.
Steps for performing the second toe and camber check in the opposite direction.
How to record the measured values from the sensor checks into a table.
An example of a measurement sheet for checking sensor accuracy.
A template for customers to record sensor check measurements.
Instructions on how to evaluate the sensor measurement sheets.
Lists common fault messages, their possible causes, and remedies.
Further fault messages and their possible causes and remedies.
Troubleshooting for issues occurring during the system's operation sequence.
Specifies the measurement ranges for various alignment parameters.
Physical dimensions and weight of the FWA 4630 trolley.
Physical dimensions and weight of the measurement sensors.
Recommended temperature and humidity conditions for operation.
Technical specifications for the unit's power supply.
