Bosch GBH 2-24 DSR - Page 9

English - 1
1 Dust protection cap
2 Locking sleeve
3 Locking button for On/Off switch
4 On/Off switch
5 Rotational direction switch (GBH 2-24 DSR)
6 Mode selector switch
7 Release button
8 Auxiliary handle
9 Depth stop
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 88 dB (A); sound
power level: 101 dB (A).
Wear hearing protection!
The typical weighted acceleration is 11 m/s
2
.
The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and
right/left rotation are also suitable for screwing
and thread cutting.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
If the mains cable is damaged or
cut through while working, do not
touch the cable but immediately
pull the mains plug. Never use the
machine with a damaged cable.
Tool Specifications
Rotary Hammer GBH 2-24 DS GBH 2-24 DSE GBH 2-24 DSR
Part number 0 611 228 0.. 0 611 228 6.. 0 611 228 7..
Rated power [W] 620 620 620
Output power [W] 360 360 360
Speed control – • •
Right/Left rotation – – •
Rated speed
- Right rotation [rpm] 870 0–870 0–870
- Left rotation [rpm] – – 0–500
Impact rate [bpm] 4850 0–4850 0–4850
Impact energy per stroke [J] 2.2 2.2 2.2
Tool holder SDS-plus SDS-plus SDS-plus
Spindle neck diameter Ø [mm] 43 43 43
Chisel positions 36 36 36
Drilling output:
- Masonry (core bit) max. [mm] 65 65 65
- Stone, Concrete max. [mm] 24 24 24
- Wood max. [mm] 30 30 30
- Steel max. [mm] 13 13 13
Weight
(without optional extras) approx.
[kg] 2.4 2.4 2.4
Protection class / II / II / II
Machine Elements
Noise/Vibration Information
Intended Use
For Your Safety
9 • 1 619 929 393 • TMS • 11.10.01