-7-
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.
ISED Canada
These guidelines are based on the safety stan-
dards previously set by international standard
bodies. These standards include a substantial
safety margin designed to assure the safety of
all persons, regardless of age and health.
This device and its antenna must not be co-lo-
cated or operating in conjunction with any other
antenna or transmitter.
FCC Caution
Specifications
Battery Packs / Chargers:
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
Model Number GBH18V-28C
Voltage rating 18 V
Shank style SDS-plus®
Maximum Drilling Diameter in:
Concrete
Steel
1-1/8” (28mm)
1/2” (13mm)
Permitted battery temperature during charging +32…+113°F (0…+45°C)
Permitted ambient temperature during operation and storage +5…+122°F (-15…+50°C)
Recommended ambient temperature during charging +32…+95°F (0...+35°C)
The power tool is intended for hammer drilling
in concrete, brick and stone, as well as for light
chiselling work. It is also suitable for drilling with-
out impact in wood, metal, ceramic and plastic.
Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
With the Bluetooth® Low Energy Module GCY
42 inserted, power tool data and settings can
be transferred between the power tool and a
mobile device by means of Bluetooth® wireless
technology.
Intended Use
160992A8B9 GBH18V-28C 20230316.indd 7 3/16/23 4:08 PM
To Next Page
Loading...
