4
Keep hands out of the plunger and plunger
rod area of the caulk gun. Fingers can be
crushed between the barrel/enclosure and
the plunger.
When operating the caulk gun overhead, do
not position head and eyes directly
underneath the dispensing nozzle. Caulk may
drip into eyes and cause personal injury.
Do not position head and eyes in the path of
the plunger rod. Plunger rod may slip back in
direction of user. Always wear eye protection
when using the caulk/adhesive dispenser.
Always work in properly ventilated area and
wear appropriate respiratory protection if
necessary. Fumes from some caulks and
adhesives can be hazardous.
Lock trigger in the OFF position when not in
use to avoid inadvertent release of material.
Safety Rules for Cordless Caulk Guns
ejected from the battery; avoid contact. If
c
ontact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 265 °F (130 °C) may
cause explosion.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the
i
nstructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
▶ Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
General Power Tool Safety Warnings
To Next Page
Loading...
