Bosch GCL 2-15 Professional - Technical Data

(11)
Serial number
(12)
Laser warning label
(13)
Rotating mount (RM1)
(14)
Guide rail
(15)
Fastening slot
(16)
Magnet
(17)
Ceiling clip
A)
(18)
Universal holder (BM1)
A)
(19)
Laser target plate
A)
(20)
Case
A)
(21)
Inlay
A)
(22)
Tripod (BT150)
A)
(23)
Telescopic shaft (BT350)
A)
(24)
Protective bag
A)
(25)
Laser viewing glasses
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Point and line lasers GCL 2-15 GCL 2-15 G
Article number
3 601 K66 E.. 3 601 K66 J..
Working range
A)
– Laser line 15m 15m
– Laser point facing up 10m 10m
– Laser point facing down 10m 10m
Levelling accuracy
– Laser lines ±0.3mm/m ±0.3mm/m
– Laser points ±0.7mm/m ±0.7mm/m
Typical self-levelling range ±4° ±4°
Typical levelling time <4s <4s
Operating temperature −10 °C to +50 °C −10 °C to +50 °C
Storage temperature −20 °C to +70 °C −20 °C to +70 °C
Max. altitude 2000m 2000m
Max. relative humidity 90% 90%
Pollution degree according
IEC 61010-1
2
B)
2
B)
Laser class 2 2
Laser line
– Laser type 630–650nm, <1mW 500–540nm, <10mW
– Colour of the laser beam Red Green
– C
6
1 10
– Divergence 0.5mrad (full angle) 50×10mrad (full angle)
Laser point
– Laser type 630–650nm, <1mW 630–650nm, <1mW
– Colour of the laser beam Red Red
– C
6
1 1
– Divergence 0.8mrad (full angle) 0.8mrad (full angle)
Tripod mount 1/4", 5/8" 1/4", 5/8"
Batteries 3×1.5V LR6(AA) 3×1.5V LR6(AA)
Operating duration in operating mode
– Cross-line and point mode 6h 6h
– Cross-line mode 8h 8h
– Line and point mode 12 h 10 h
– Line mode 16 h 12 h
English | 17
Bosch Power Tools 1 609 92A 4HE | (09.08.2018)