English | 5
Bosch Power Tools 1 609 92A 01S | (21.12.12)
Delivery Scope
Cordless impact wrench.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Technical Data
The technical data of the machine are listed in the table on
page 30.
Technical data determined with battery from delivery scope.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Mounting and Operation
Maintenance and Cleaning
For safe and proper working, always keep the machine
and ventilation slots clean.
Clean the application tool, the tool holder, the power tool’s
ventilations slots, and the battery’s ventilation slots each time
after using.
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 4008268484
Fax: (0571) 87774502
E-Mail: contact.ptcn@cn.bosch.com
www.bosch-pt.com.cn
Low speed
High speed
Switching On
Switching Off
U Rated voltage
n
0
No-load speed
n
S
Impact rate
M Maximum torque according to ISO 5393
Metal
ØBolt size
Tool holder
Weight according to EPTA-Procedure
01/2003
Symbol Meaning
Action Figure Page
Removing the battery
1 31
Inserting the battery
2 31
Checking the battery charge condition
3 31
Mounting application tools
4 32
Reversing the rotational direction
5 32
Switching On and Off
6 33
Selecting Accessories
– 34
OBJ_BUCH-1604-003.book Page 5 Friday, December 21, 2012 8:45 AM
To Next Page
Loading...
