4
Hold the power tool by insulated
gripping surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a “live” wire may make
exposed metal parts of the power tool
“live” and could give the operator an
electric shock.
Wear ear protectors when impact
driving. Exposure to noise can cause
hearing loss.
Brace the tool properly before use. This
tool produces a high output torque and
without properly bracing the tool during
operation, loss of control may occur
resulting in personal injury.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by
hand or against your body leaves it
unstable and may lead to loss of control.
Do not drill, fasten or break into
existing walls or other blind areas
where electrical wiring may exist. If this
situation is unavoidable, disconnect all
fuses or circuit breakers feeding this
worksite.
Always wear safety goggles or eye
protection when using this tool.
Wear ear protectors when using the
tool for extended periods. Prolonged
exposure to high intensity noise can
cause hearing loss.
Use thick cushioned gloves and limit
the exposure time by taking frequent
rest periods. Vibration caused by
hammer-drill action may be harmful to
your hands and arms.
Secure the material being fastened.
Never hold it in your hand or across
your legs. Unstable support can cause
loss of control and injury.
Remove battery pack before changing
accessories. Accidental starting may
occur because battery appliances with a
battery inserted are in the operative
condition.
Safety Rules for Cordless Impact Drivers
Battery tool use and care
Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it
away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush
with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause
irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or
modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265 °F may
cause explosion.
Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range
specified in the instructions. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire.
Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
To Next Page
Loading...
