Bosch GKS Professional Series - Technical data; Noise;vibration information

8 | English
1 609 92A 4BR | (19.09.2018) Bosch Power Tools
(28)
Handle (insulated gripping surface)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Hand-held circular saw GKS235Turbo GKS235Turbo GKS9
Article number
3 601 EA2 0.. 3 601 EA2 0B. 3 601 EA2 00.
3 601 EA2 07.
Rated power input W 2050 2050 2050
No-load speed rpm 5300 5300 5300
Max. speed under load rpm 3500 3500 3500
Max. cutting depth
– at a 0° mitre/bevel angle mm 85 85 85
– at a 45° mitre/bevel angle mm 65 65 65
Spindle lock ● ● ●
Base plate dimensions mm 383 x 170 383 x 170 383 x 170
Max. saw blade diameter mm 235 235 235
Min. saw blade diameter mm 230 230 230
Max. base blade thickness mm 2.2 2.2 2.2
Max. tooth thickness/offset mm 3.2 3.2 3.2
Min. tooth thickness/offset mm 2.0 2.0 2.0
Locating bore mm 25 25.4 30
Weight according to
EPTA-Procedure 01:2014
kg 7.6 7.6 7.6
Protection class / II / II / II
Only for power tools without starting current limitation: Switching these on causes the voltage to drop briefly. Interference
with other equipment may occur in the event of unfavourable conditions in the electricity supply. Malfunctions are not expec-
ted if the impedances in the electricity supply are below 0.14ohms.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/vibration information
Noise emission values determined according to
EN62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 92dB(A); sound power level
103dB(A). Uncertainty K=3dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-5:
Sawing wood: a
h
=3.3m/s
2
, K=1.5m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
u Only use saw blades the maximum permitted speed of
which is higher than the no-load speed of the power
tool.