Bosch GLL 100 GX - Page 25

-25-
8 ft (2.5 m)
5
A
B
16 ft (5 m)
– Set up the measuring tool 16 ft (5 m) away turned by 180° and allow
it to level in.
– Align the height of the measuring tool (using a tripod or by under-
laying, if required) in such a manner that the center of the laser line
is projected exactly against the previously marked point II on wall B.
– Mark the center of the laser line as point III (vertically above or be-
low point I) on the wall A.
2610041780 6-18 GLL100G.indd 25 6/8/18 7:14 AM