page heading
SAVE THESE INSTRUCTIONS 9
Model number GLL50-20 GLL50-20G
Article number 3601K65210 3601K65310
Working range
1)
50 ft (15 m) 65 ft (20m)
Levelling Accuracy
2)
± 5/16 in. @ 30 ft.
(± 8mm @ 10m)
± 1/4 in. @ 30 ft.
(± 7mm @ 10m)
Self-levelling range, typically ±3.5°
Operating temperature 14° F to 104° F (-10° C to +40° C)
Storage temperature -4° F to 158° F (-20° C to +70° C)
Max. altitude 6560 ft (2000 m)
Relative air humidity, max. 90%
Pollution degree according IEC 61010 2
3)
Laser class 2
Laser type < 5 mW, 630−650 nm < 5 mW, 500 - 540 nm
Mount threading 1/4”-20
C6 5
Divergence 25 x 5 mrad (full angle)
Protection rating IP55
Weight .77 lb (0.35 kg)
Dimensions 4.1 x 2.5 x 3.9 in (104 x 64 x 100 mm)
Li-ion Battery pack (optional)
Type BA 3.7V 1.0Ah A
Article number 1 607 A35 0N9
USB port Type C
Rated voltage 3.7 V
Capacity 1.0 Ah
Number of battery cells 1
Power adaptor (recommended)
Output voltage 5.0 V
Output current 500 mA
Recommended power adaptor 1 600 A01 43H
Recommended USB Type-C® cable 1 600 A01 6A8
The tool can be clearly identified with the serial number on the type plate.
1)
The working range can be decreased by unfavorable environmental conditions (e.g. direct sun
exposure).
2)
Valid when leveled (0º).
3)
Conductive pollution occurs, or dry, non-conductive pollution occurs which becomes conductive
due to condensation which is expected. In such conditions, equipment is normally protected
against exposure to direct sunlight, precipitation, and full wind pressure, but neither temperature
nor humidity is controlled.
Specifications
160992A8JG GLL50-20 G 202306.indd 9 6/9/23 9:46 AM
To Next Page
Loading...
