-9-
Technical Data
Model Number GLL50-40G
Article number 3 601 K65 …
Working range (diameter)
A)
100 ft (30 m)
Leveling accuracy
B)C)D)
±3/16 in. at 30 ft (±0.4 mm/m)
Self-leveling range (typical) ±4°
Leveling duration (typical) <4s
Operating temperature 23 °F to 104 °F (–5 °C to +40 °C)
Storage temperature -4 °F to 158 °F (–20 °C to +70 °C)
Max. altitude 6560 ft (2000 m)
Relative air humidity, max. 90 %
Pollution degree according IEC 61010
E)
2
Laser class 2
Laser type <10 mW, 500 - 540 nm
C
6
10
Divergence 30 x 20 mrad (full angle)
Tripod mount 1/4”
Batteries 4 x 1.5V LR6 (AA)
Weight 1.37 lbs. (0.62 kg)
Dimensions 4.37 × 2.83 × 4.69 inches
(111 × 72 × 119 mm)
Degree of protection IP 64 (dust tight and splash
water protected)
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).
B) At 68-77 °F (20–25 °C)
C) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration, no fog, no
smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations in accuracy.
D) Applies for the intersection point and the corresponding angles 90°/180°/270°
E) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is
expected.
The serial number (6) on the type plate is used to clearly identify your measuring tool.
2610059938 GLL50-40G 02-21.indd 9 2/23/21 3:03 PM
To Next Page
Loading...
