EasyManua.ls Logo

Bosch GLM 100-25 C - Inserting;Changing the Battery

Bosch GLM 100-25 C
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 | English
Digital laser measure GLM 100-25 C
Data transmission
Bluetooth® Bluetooth® 4.2
Low Energy
G)
Operating frequency range 2402–2480MHz
Max. transmission power 8mW
A) When measuring from the front edge of the measuring tool, this applies for high reflectivity of the
target (e.g. a wall painted white), weak background lighting and a 25°C operating temperature; a
distance-dependent deviation of ±0.05mm/m must additionally be factored in.
B) When measuring from the front edge of the measuring tool, this applies for high reflectivity of the
target (e.g. a wall painted white), strong background lighting, 25°C operating temperature and
large altitudes. In addition, a deviation of ±0.15mm/m must be taken into account, depending on
the distance.
C) At an operating temperature of 25 °C
D) After user calibration at 0° and 90°; An additional grade error of ±0.01°/degree to 45° (max.) has
to be taken into account. The left-hand side of the measuring tool serves as the reference level for
grade measurement.
E) In continuous measurement mode, the max. operating temperature is +40 °C.
F) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by con-
densation is expected.
G) When using Bluetooth® Low Energy devices, it may not be possible to establish a connection de-
pending on the model and operating system. Bluetooth® tools must support the GATT profile.
The serial number (15) on the type plate is used to clearly identify your measuring tool.
Inserting/Changing the Battery
Using alkali-manganese or nickel metal hydride rechargeable batteries (especially at low
operating temperatures) is recommended for operation of the measuring tool.
With 1.2 V rechargeable batteries, more measurements may be possible than with 1.5 V
batteries, depending on the capacity.
Press the release button(7) and swing out the stop pin(8) by 180°.
To open the battery compartment cover(16), flip the screw cap(23) up and turn it a
quarter rotation anticlockwise.
Lift the battery compartment cover(16) on the screw cap(23).
Insert the batteries or rechargeable batteries.
1 609 92A 7E1 | (14.12.2021) Bosch Power Tools

Table of Contents

Related product manuals