Bosch GLM 100-25 C - Indirect Height Measurement

English | 25
Indirect Height Measurement
B
1
1
A
With indirect height measurement, you can
determine distanceAB by measuring dis-
tance1. The measuring tool calculates the
required heightAB from angle and dis-
tance1.
Correct results are achieved only when the
right angle required for the respective
measurement is exactly adhered to.
Press the button to open the Functions menu.
Select indirect distance measurement and confirm the selection with the but-
ton.
Select indirect height measurement and confirm the selection with the button.
Briefly press the button to switch on the laser.
Place the measuring tool at the height of the lower measuring pointB.
Tilt the measuring tool so that the laser is pointed at the upper measuring pointA.
Press the button to start the measurement.
09.08.2021
13:20
45º
m
37.116
45.0
26.245 m
(a)
(h)
After the measurement has been completed, the height will
be automatically calculated and displayed in the result
line(a). The measured values for section1 and angle are in
the measured value lines(h).
Bosch Power Tools 1 609 92A 7E1 | (14.12.2021)