Bosch GLM 100-25 C - Double Indirect Height Measurement

26 | English
Double Indirect Height Measurement
1
2
1
2
A
B
With double indirect height measurement,
you can determine distanceAB by measur-
ing distances1 and2. The measuring tool
calculates the required heightAB from
angle and distances1 and2.
The use of a tripod is recommended for this
measurement.
Press the button to open the Functions menu.
Select indirect distance measurement and confirm the selection with the but-
ton.
Select double indirect height measurement and confirm the selection with the
button.
Briefly press the button to switch on the laser.
Tilt the measuring tool so that the laser is pointed at the upper measuring pointA.
Press the button to start the first measurement.
Tilt the measuring tool so that the laser is pointed at the lower measuring pointB. Do
not change the position of the measuring tool when doing so.
Press the button to start the second measurement.
09.08.2021
13:20
º
30º
32.852 m
m
48.873
m
56.335
35.5
(a)
(h)
After the measurement has been completed, the height will
be automatically calculated and displayed in the result
line(a). The measured values for section1, section2 and
angle are in the measured value lines(h).
1 609 92A 7E1 | (14.12.2021) Bosch Power Tools