Bosch GLM 100-25 C - Trapezoid Measurement

28 | English
Trapezoid Measurement
1
A
3
B
2
90°
90°
Professional
GLM 120 C
Professional
GLM 120 C
Professional
GLM 120 C
1
3
2
With trapezoid measurement, the length
of a sloping roof can, for instance, be de-
termined. You can determine sectionAB
by measuring sections1, 2 and 3 in this
order. The measuring tool calculates the
required sectionAB from sections1, 2
and 3.
Ensure that the measurement of distance
3 begins exactly at the point where distance 1 ends that there is a right angle between
both distances 1 and 2 and distances 1 and 3.
Press the button to open the Functions menu.
Select indirect distance measurement and confirm the selection with the but-
ton.
Select trapezoid measurement and confirm the selection with the button.
Briefly press the button to switch on the laser.
Measure section 1 with the button.
Measure section 2 with the button.
Measure section 3 with the button.
09.08.2021
13:20
60º
m
3.624
m
2.456
m
4.872
4.356 m
(a)
(h)
After the measurement has been completed, section AB will
be automatically calculated and displayed in the result
line(a). The measured values for sections1, 2 and 3 are in
the measured value lines(h).
1 609 92A 7E1 | (14.12.2021) Bosch Power Tools