Bosch GLM 100-25 C - Memory Function

English | 33
09.08.2021
13:20
0.0º
max
min
m
m
1.291
m
11.623
11.623
(a)
(h)
The current measured value is displayed in the result line(a),
and the maximum and the minimum measured value in the
measured value lines(h).
Continuous measurement switches off automatically after5min.
Memory Function
The value or end result of each completed measurement is automatically saved. The last
50 values (measured values or end results) are saved. If the memory is full, the oldest
value will be overwritten. The oldest value is at position 1 in the memory, the newest value
at position 50 (for 50 available memory values).
To open the memory function, press the button.
The last value will be displayed.
Press the button or button to scroll through the saved values.
09.06.2017
13:20:23
30º
32.852 m
44
m
48.873
m
56.335
35.5
º
The number of the memory value is shown at the top of the
display, and the symbol of the corresponding measuring func-
tion is shown on the left. If there is no value available in the
memory, "0.000" is shown at the bottom of the display and
"0" at the top.
Deleting Memory Values
To delete the displayed value, press the button.
Confirm with the button.
Bosch Power Tools 1 609 92A 7E1 | (14.12.2021)