34 | English
To delete all saved values, select the Delete memory menu item in the Basic settings
menu. Deleting Memory
Adding/Subtracting Values
Adding Values During Length Measurement
Select the length measurement function.
Take the first measurement.
Press the button.
Take the second measurement.
As soon as the second measurement has been completed, the result of the second
measurement is displayed in the measured value lines(h) and the end result in the res-
ult line(a).
Adding Values During Area and Volume Measurement
Select the area measurement or volume measurement function.
Take the first area measurement or volume measurement.
Press the button.
Take the second area measurement or volume measurement.
As soon as the second or third measurement has been completed, the area or volume
is automatically calculated and displayed. The result is displayed in the result line(a).
The individual measured values are in the measured value lines(h).
Press the button to show the end result of the addition.
The end result is displayed in the result line(a). The results of the individual area or
volume measurements are in the measured value lines(h).
Subtracting Values
Press the button to subtract values. The subsequent steps are the same as for the
section on "adding values".
1 609 92A 7E1 | (14.12.2021) Bosch Power Tools
To Next Page
Loading...
