English | 35
Deleting Measured Values
You can delete the most recently recorded measured value in all measuring functions by
briefly pressing button .
By pressing the button briefly multiple times, the measured values are deleted in re-
verse order.
Bluetooth® interface
Transmitting data to other devices
The measuring tool is fitted with a Bluetooth® module which enables wireless data transfer
to certain mobile devices with a Bluetooth® interface (e.g. smartphone, tablet).
Information about the system requirements for a Bluetooth® connection can be found on
the Bosch website at www.bosch‑pt.com
u Further information can be found on the Bosch product page.
When transmitting data by means of Bluetooth®, time lags may occur between the mobile
device and the measuring tool. This can be due to the distance between the two devices or
the measurement object itself.
Activating the Bluetooth® interface for transmitting data to a mobile device
23.198m
05.05.2017
7:26:12
30º
m
9.273
m
8.179
m
18.558
m
13.919
Ensure that the Bluetooth® interface is activated on your
mobile device.
Briefly press the button or press and hold the but-
ton to open the Basic settings menu.
Select .
Press the button or the button to select .
To confirm the selection, press the button.
The Bluetooth® symbol is shown on the display in
white(f).
Bosch apps are available to expand the range of functions. These can be downloaded in
the respective app stores, depending on the device.
The connection between mobile device and measuring tool is established after the Bosch
application has started. If multiple active measuring tools are found, select the appropri-
ate measuring tool using the serial number. You can find the serial number(15) on your
measuring tool's type plate.
Bosch Power Tools 1 609 92A 7E1 | (14.12.2021)
To Next Page
Loading...
