Bosch GLM 50 C - Data Transmission; Product Features

12 | English
1 609 92A 3UB | (15.3.17) Bosch Power Tools
Product Features
The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
Dimensions
106 x 45 x
24 mm
106 x 45 x
24 mm
106 x 45 x
24 mm
Degree of protection
IP 54 (dust and
splash proof)
F)
IP 54 (dust and
splash proof)
F)
IP 54 (dust and
splash proof)
F)
Batteries 2x1.5VLR03
(AAA)
2 x 1.5 V LR03
(AAA)
2x1.5VLR03
(AAA)
Rechargeable batteries
2x1.2VHR03
(AAA)
2x1.2VHR03
(AAA)
2 x 1.2 V HR03
(AAA)
Battery life, approximately
– Individual measurements
– Continuous measurement
10000
H)
2.5 h
H)
10000
H)
2.5 h
H)
10000
H)
2.5 h
H)
Setting the unit of measure m m, ft, in m
Data transmission
Bluetooth® Bluetooth® 4.0
(Classic and
Low Energy)
G)
Bluetooth® 4.0
(Classic and
Low Energy)
G)
Bluetooth® 4.0
(Classic and
Low Energy)
G)
A) For measurements from the rear measuring tool edge, weak backlighting and 25 °C operating
temperature are applicable for high reflectivity of the target (e.g. a white-painted wall). In addition,
a deviation influence of ± 0.05 mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, applies to high reflectivity of the target
(e.g. white cardboard), strong backlighting and – 10 °C to +45 °C operating temperature. In addi-
tion, a deviation influence of ±0.15 mm/m must be taken into account.
C) After calibration at 0 ° and 90 ° with an additional grade error of ±0.01 °/degree to 45 ° (max.).
D) At 25 °C operating temperature
E) In the continuous measurement function, the maximum operating temperature is +40 °C.
F) except battery compartment
G) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
H) Bluetooth® deactivated
I) The left-hand side of the measuring tool serves as the reference level for grade measurement.
The measuring tool can be clearly identified with the serial number 11 on the type plate.
Digital Laser Measure GLM 50 C GLM 50 C GLM 5000 C
OBJ_BUCH-2548-004.book Page 12 Wednesday, March 15, 2017 12:57 PM