20 | English
1 609 92A 3UB | (15.3.17) Bosch Power Tools
The measuring tool continuously measures the distance to the starting
point. The defined length and the current measured value are thereby
displayed. The lower or upper arrow displays the shortest distance to
the next or last marking.
Note: The continuous measuring enables you to set a measured value
as a defined length by pressing the button 4.
The left factor specifies how many times the defined length has already
been reached. The green arrows on either side of the display indicate
the reaching of a length for marking purposes.
Gradient Measurement/Digital Spirit Level
Select the inclination measurement/digital spirit level .
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination 3° exceeds, the ball in the display lights red.
Gradient measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level for
grade measurement. If the display flashes during measurement, the
measuring tool has been tipped too heavily to the side.
Memory Functions
The value or end result of each completed measurement is automatically saved.
Memory value display
Maximum 30 values (measured values or end results) can be retrieved.
Select the memory function .
The number of the memory value is shown at the top of the display, the
corresponding memory value is shown at the bottom and the corre-
sponding measuring function is shown on the left.
Press button 3 [+] to browse forwards through the saved values.
Press button 8 [–] to browse backwards through the saved values.
m0.483
0.500m
1
0.81x
m0.500
0.500m1x
1°2° 3°
To Next Page
Loading...
