Bosch GLM 80 Professional - Page 9

English | 9
Bosch Power Tools 1 609 92A 0KD | (7.5.14)
Supervise children. This will ensure
that children do not play with the
charger.
Cleaning and user maintenance of
the battery charger shall not be
made by children without supervi-
sion.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
Technical Data
Digital Laser Measure GLM 80
Professional
GLM 80+R60
Professional
Article number 3 601 K72 3.. 3 601 K72 3..
Distance measurement
Measuring range (typical) 0.05 –80 m
A)
0.05 –80 m
A)
Measuring range (typical under unfavourable conditions) 45 m
B)
45 m
B)
Measuring accuracy (typical) ±1.5 mm
A)
±1.5mm
A)
Measuring accuracy (typical under unfavourable conditions) ±2.5 mm
B)
±2.5mm
B)
Lowest indication unit 0.1 mm 0.1 mm
Indirect Distance Measurement and Vial
Measuring range –60° – +60° –60° – +60°
Grade measurement
Measuring range 0° –360° (4x90°)
C)
0° –360° (4x90°)
C)
Measuring accuracy (typical) ±0.2°
D)F)
±0.2°
D)F)
Lowest indication unit 0.1° 0.1°
General
Operating temperature –10 °C...+50 °C
E)
–10°C...+50°C
E)
Storage temperature –20°C...+50°C –20°C...+50°C
Allowable charging temperature range
+5 °C...+40 °C +5 °C...+40 °C
Relative air humidity, max.
90 % 90 %
Laser class
22
Laser type
635 nm, <1 mW 635 nm, <1 mW
Laser beam diameter (at 25 °C) approx.
–at 10m distance
–at 80m distance
6mm
48 mm
6mm
48 mm
Setting accuracy of the laser to the housing, approx.
–Vertical
– Horizontal
±2mm/m
F)
±10 mm/m
F)
±2 mm/m
F)
±10mm/m
F)
Automatic switch-off after approx.
–Laser
– Measuring tool (without measurement)
20 s
5min
20 s
5min
Weight according to EPTA-Procedure 01/2003 0.14 kg 0.14 kg
Dimensions
51 x 111 x 30 mm 51 x 111 x 30 mm
OBJ_DOKU-26749-003.fm Page 9 Wednesday, May 7, 2014 3:15 PM