8 | English
1 609 92A 4GN | (28.6.18) Bosch Power Tools
English
Safety Notes
All instructions must be read
and observed in order to
work safely with the measur-
ing tool. The integrated pro-
tections in the measuring
tool may be compromised if the measuring tool is not used
in accordance with the instructions provided. Never make
warning signs on the measuring tool unrecognisable.
STORE THESE INSTRUCTIONS IN A SAFE PLACE AND IN-
CLUDE THEM WITH THE MEASURING TOOL WHEN GIVING
IT TO A THIRD PARTY.
Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
The measuring tool is provided with a warning label
(marked with number 20 in the representation of the
measuring tool on the graphics page).
If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
Do not make any modifications to the laser equipment.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Protect the measuring tool against heat, e.g.,
against continuous intense sunlight, fire, wa-
ter, and moisture. Danger of explosion.
In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Product Description and
Specifications
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
Technical Data
14
Digital Laser Measure GLM 80 GLM 80+R60
Article number
3 601 K72 3.. 3 601 K72 3..
Distance measurement
Measuring range (typical) 0.05–80 m
A)
0.05–80 m
A)
Measuring range (typical under unfavourable conditions) 45 m
B)
45 m
B)
Measuring accuracy (typical) ±1.5 mm
A)
±1.5 mm
A)
Measuring accuracy (typical under unfavourable conditions) ±2.5 mm
B)
±2.5 mm
B)
Lowest indication unit 0.1 mm 0.1 mm
OBJ_BUCH-3509-001.book Page 8 Thursday, June 28, 2018 9:49 AM
Laser Radiation
Do not stare into beam
Class 2 laser product
To Next Page
Loading...
