10
Digital Laser Measure GLM165-10
Measuring range (typical) 6 in - 165 ft (0.15 –50 m
A
)
Measuring accuracy (typical) ±1/16 in (±1.5 mm
B
)
Lowest indication unit 1/32 in (1 mm)
Automatic switch-off after approx.
- Laser 20 s
- Measuring Tool 5 min
Operating temperature +14° F to 113° F (-10° C to +45° C)
Storage temperature -4° F to 158° F (-20° C to +70° C)
Relative air humidity, max. 90 %
Laser class 2
Laser type 635 nm, <1mW
Laser beam diameter at 77° F (25 °C)
- at 30 ft (10 m) distance, approx. 3/8 in (9 mm)
- at 165 ft (50 m) distance, approx. 1-3/4 in (45 mm)
Batteries 2 x 1.5V (AAA)
Battery service life in measuring operation, approx. 5 h
Degree of Protection IP54 (dust and splash water protected)
C
Weight 0.2 lb (0.09 kg)
Dimensions 4.1 x 1.6 x 0.9 in (105 x 41 x 24 mm)
A) The working range increases depending on how well the laser light is reflected from
the surface of the target (scattered, not reflective) and with increased brightness of
the laser point to the ambient light intensity (interior spaces, twilight). In unfavorable
conditions, e.g., with extreme interior illumination or a badly reflecting surface, the
measuring range may be limited.
B) In favorable conditions, a deviation influence of ±0.05 mm/m must be taken
into account. In unfavorable conditions, e.g., with extreme illumination, badly
reflecting surface or the room temperature deviating heavily from 77 °F (25 °C),
the maximum deviation can be up to ±3.0mm. Additionally, a deviation influence
of 0.15mm/m must be taken into account.
C) Does not apply to battery compartment.
The measuring tool can be clearly identified with the serial
number 5 on the type plate.
Technical Data
To Next Page
Loading...
