English | 11
Bosch Power Tools 1 609 929 S08 | (30.9.08)
en
Safety Notes
Point Laser
Working safely with the measuring
tool is possible only when the op-
erating and safety information are
read completely and the instruc-
tions contained therein are strictly
followed. Never make warning labels on the
measuring tool unrecognisable. SAVE THESE
INSTRUCTIONS.
f Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those
mentioned here, can lead to dangerous
radiation exposure.
f The measuring tool is provided with a warn-
ing label in English (marked with number 5
in the representation of the measuring tool
on the graphics page).
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam your-
self. This measuring tool produces
laser class 2 laser radiation ac-
cording to IEC 60825-1. This can
lead to persons being blinded.
f Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
f Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
f Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
Holder
Keep the holder 8 away from
cardiac pacemakers. The mag-
nets 12 generate a field that can
impair the function of cardiac
pacemakers.
f Keep the holder 8 away from magnetic data
medium and magnetically-sensitive equip-
ment. The effect of the magnets 12 can lead
to irreversible data loss.
Functional Description
Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.
Intended Use
The measuring tool is intended for determining
and checking horizontal and vertical lines as
well as plumb points.
IEC 60825-1:2007-03
<
1 mW, 635 nm
OBJ_BUCH-807-002.book Page 11 Tuesday, September 30, 2008 1:13 PM
To Next Page
Loading...
