EasyManua.ls Logo

Bosch Greenstar combi 151 p - Preparing the Appliance for Operation; Water Pressure and Filling; Initial Setup Steps

Bosch Greenstar combi 151 p
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparing the appliance for operation | 11
6720872363 (2017/04)
Greenstar combi 100 p / 151 p
2.3 Overview of boiler types
Table 2 Appliance types
Z Central heating appliance
W DHW heating
B Condensing technology
28 Output and DHW output up to 95,500 BTU/hr (28 kW)
42 Output and DHW output up to 143,300 BTU/hr (42 kW)
-3 Version
A Fan-supported appliance
23 Natural gas (NG)
3 Preparing the appliance for operation
If existing, open the heating supply valve and the heating return valve.
If existing, open the cold water valve and the DHW valve.
Open the gas cock.
Open the control panel cover.
3.1 Checking the boiler water pressure
The standard boiler water pressure is 14.5 - 21.75 psi (1 - 1.5 bar).
Should a higher boiler water pressure be required, refer to a trained and certified
heating contractor.
ZWB28-3 A 23 Greenstar combi 100 p
ZWB42-3 A 23 Greenstar combi 151 p

Other manuals for Bosch Greenstar combi 151 p

Related product manuals