en | 19Operating instructions
Robert Bosch Ltda. F 000 622 255 | 02.2008
Machine elements
1 Key chuck
2 “Drilling/Impact Drilling” selector switch
3 Lock-on button for On/Off switch
4 On/Off switch
5 Thumwheel for speed preselection (GSB 16 RE)
6 Rotational direction switch (GSB 13 RE and
GSB 16 RE)
7 Winger screw for depth stop adjustment
8 Winged screw for auxiliary handle adjustment
9 Auxiliary handle*
10 Depth stop*
11 Chuck key
*Not all of the accessories illustrated or
described are included as standard delivery.
Intended use
The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal, ceramics and plastics. Machines
with electronic control and right/left rotation are
also suitable for screwing and thread-cutting.
Noise/vibration information
Measured values determined according to
EN 60 745-1.
Typically the A-weighted noise levels of the
product are: sound pressure level: 99 dB (A);
sound power level: 112 dB (A).
Wear ear protection!
The typical weighted acceleration is 16 m/s
2
.
Safety instructions
Working safely with this machine is
possible only when the operating and
safety information are read completely
and the instructions contained therein
are strictly followed. In addition, the
general safety instructions on page 15 must be
followed. Before using for the rst time, ask
for a practical demonstration.
If the mains cable is damaged or cut
through while working, do not touch the
cable but immediately pull the mains plug.
Never use the machine with a damaged cable.
Technical data
Impact Drill
GSB 13 GSB 13 RE
GSB 16 GSB 16 RE
Part number
0 601 13D 0... 0 601 13D 5... 0 601 218 0... 0 601 218 5...
Rated power [W] 600 600 700 700
Amperage
127 V [A] 5,0 5,0 5,8 5,8
220 V [A] 2,9 2,9 3,4 3,4
No-load speed [min
–1
] 3000 0 – 3000 3000 0 – 3000
Impact rate max [min
–1
] 48.000 0 – 48.000 48.000 0 – 48.000
Drill chuck clamping range Ø
max. [mm] 13 (1/2 ”) 13 (1/2”) 13 (1/2”) 13 (1/2”)
Drill Ø
— concrete max. [mm] 13 13 16 16
— steel max. [mm] 10 10 13 13
— wood max. [mm] 25 25 30 30
Weight approx. [kg] 1,7 1,7 1,8 1,8
Safety class
/ II / II / II / II
To Next Page
Loading...
