Bosch GSB 19-2 RE - Product Description and Specifications; Intended Use; Product Features; Technical Data

English | 13
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for impact drilling in brick, con-
crete and stone, as well as for drilling in wood, metal,
ceramic and plastic. Tools with electronic control and right/
left rotation are also suitable for screwdriving and thread
cutting.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Keyless chuck
(2)
"Drilling/impact drilling" selector switch
(3)
Rotational direction switch
(4)
Lock-on button for on/off switch
(5)
Speed preselection thumbwheel
(6)
On/off switch
(7)
Gear selector switch
(8)
Auxiliary handle (insulated gripping surface)
A)
(9)
Depth stop
A)
(10)
Handle (insulated gripping surface)
(11)
Front sleeve
A)
(12)
Rear sleeve
A)
(13)
Drill chuck key
A)
(14)
Keyed chuck
A)
(15)
Screwdriver bit
A)
(16)
Universal bit holder
A)
(17)
Hex key
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Impact drill GSB 19-2 RE GSB 19-2 RE GSB 780
Article number
3 601 A7B 5.. 3 601 A7B 6.. 3 601 A7B 1..
Rated power input W 850 850 780
Power output W 430 430 390
No-load speed
– First gear min
-1
0–1 000 0–1 000 0–1 000
– Second gear min
-1
0–3 000 0–3 000 0–3 000
Rated speed
– First gear min
-1
800 800 850
– Second gear min
-1
2 060 2 060 2 170
Impact rate at no-load speed min
-1
51 000 51 000 51 000
Rated torque (1st/2nd gear) Nm 5.2/2.0 5.2/2.0 4.1/1.6
Speed preselection ● ● ●
Clockwise/anti-clockwise rotation ● ● ●
Keyed chuck – ● –
Keyless chuck ● – ●
Fully automatic spindle lock (Auto-
Lock)
● – –
Spindle collar diameter mm 43 43 43
Max. drilling diameter (first/second gear)
– Concrete mm 18/13 18/13 18/13
– Masonry mm 20/15 20/15 20/15
– Steel mm 13/8 13/8 13/8
– Wood mm 40/25 40/25 40/25
Bosch Power Tools 1 609 92A 55T | (05.07.2019)