English | 13
Bosch Power Tools 1 609 92A 0WR | (9.10.14)
The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Torque preselection ring
5 Gear selector
6 Battery pack*
7 Battery unlocking button
8 Screwdriver bit*
9 Rotational direction switch
10 On/Off switch
11 Handle (insulated gripping surface)
12 Universal bit holder*
13 Securing screw for keyless chuck
14 Hex key**
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80 dB(A); Sound power level 91 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Drilling into metal: a
h
<2.5m/s
2
, K=1.5 m/s
2
,
Screwdriving: a
h
<2.5m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Technical Data
Cordless Drill/Driver GSR 9,6-2
Professional
GSR 12-2
Professional
GSR 14,4-2
Professional
GSR 18-2
Professional
Article number
3 601 J18 L.. 3 601 J18 J.. 3 601 J18 G.. 3 601 J18 3..
Rated voltage
V= 9.6 12 14.4 18
No-load speed
–1st gear
–2nd gear
min
-1
min
-1
0–400
0–1000
0–400
0–1200
0–400
0–1400
0–400
0–1250
Max. torque for hard/soft screwdriving
application according to ISO 5393
Nm 25/10 27/11 30/15 45/22
Maximum drilling diameter (1st/2nd gear)
– Steel
– Wood
mm
mm
10/10
20/13
12/12
23/14
12/12
26/19
12/12
29/22
Max. screw dia.
mm 6 788
Chuck clamping range
mm 1–10 1–10 1–10 1–10
Drill spindle thread
3/8" 3/8" 3/8" 3/8"
Weight according to
EPTA-Procedure 01/2003
kg 1.5 1.6 1.7 1.9
OBJ_BUCH-585-005.book Page 13 Thursday, October 9, 2014 6:59 PM
To Next Page
Loading...
