12
1 Stroke rate selection thumbwheel
(GST 100 BCE)
2 On/Off switch / Infinitely-variable stroke rate
adjustment (GST 100 BCE)
3 Locking button
4 Dust cover for vacuuming
5 Contact protector
6 Stroke rod
7 Saw blade*
8 Guide roller
9 SDS lever for saw blade release
10 Lever for pendulum stroke adjustment
11 Switch for sawdust blower
12 Base plate
13 Glide shoe for base plate
14 Ventilation slots
15 Vacuuming connector piece
16 Vacuum hose*
17 Splintering protector
18 Screw
19 Circle cutter / Parallel guide*
*Accessory
Not all of the accessories illustrated or described are
included as standard delivery.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed.
In addition, the general safety
instructions in the enclosed
booklet must be followed. Be-
fore using for the first time, ask
for a practical demonstration.
If the cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
For the mounting and replacing of
the saw blade 7, wear protective
gloves.
Wear protective goggles when
working with materials which pro-
duce large amounts of chips..
For work which produces dust that
is detrimental to health, a dust pro-
tection mask should be worn. Mate-
rials containing asbestos should not
be worked.
Tool Specifications
Pendulum Action Jigsaw GST 100 B GST 100 BCE
Part Number 0 601 589 0.. 0 601 589 8..
Power input 600 W 650 W
Power output 370 W 400 W
Stroke rate at no load 3100 min
-1
500 - 3000 min
-1
Stroke 26 mm 26 mm
Stroke rate selection/Constant electronics – •
Infinitely-variable stroke rate adjustment – •
Cutting ability:
· in wood up to 110 mm up to 110 mm
· in aluminium up to 20 mm up to 20 mm
· in non-alloyed steel up to 10 mm up to 10 mm
Bevel cuts (left/right) 0 - 45 ° 0 - 45 °
Weight 2,3 kg 2,3 kg
Protection class / II / II
Operating Controls For Your Safety
GB
To Next Page
Loading...
