12
BA 2 609 931 399
1
Stroke rate selection thumbwheel
(GST 100 CE)
2
Dust cover for vacuuming
3
Contact protector
4
Stroke rod
5
Saw blade
6
Guide roller
7
SDS lever for saw blade release
8
Lever for pendulum stroke adjustment
9
Switch for sawdust blower
10
On/Off switch
11
Base plate
12
Glide shoe for base plate
13
Ventilation slots
14
Vacuuming connector piece
15
Vacuum hose*
16
Splintering protector
17
Screw
18
Circle cutter / Parallel guide
Accessory
Not all of the accessories illustrated or described are in-
cluded as standard delivery.
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are
strictly followed.
In addition, the general safety in-
structions in the enclosed book-
let must be followed. Before us-
ing for the first time, ask for a
practical demonstration.
If the cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
For the mounting and replacing of
the saw blade
5
, wear protective
gloves.
Wear protective goggles when
working with materials which pro-
duce large amounts of chips..
For work which produces dust that
is detrimental to health, a dust pro-
tection mask should be worn. Mate-
rials containing asbestos should not
be worked.
Tool Specifications
Pendulum Action Jigsaw GST 100 GST 100 CE
Part Number 0 601 588 0.. 0 601 588 7..
Power input 600 W 650 W
Power output 370 W 400 W
Stroke rate at no load 3100 min
-1
500 - 3000 min
-1
Stroke 26 mm 26 mm
Stroke rate selection/Constant electronics –
•
Cutting ability:
•
in wood up to 110 mm up to 110 mm
•
in aluminium up to 20 mm up to 20 mm
•
in non-alloyed steel up to 10 mm up to 10 mm
Bevel cuts (left/right) 0 - 45 ° 0 - 45 °
Weight 2,3 kg 2,3 kg
Protection class
/ II / II
Operating Controls For Your Safety
GB
GST 100/CE - GB Seite 12 Donnerstag, 11. März 1999 8:35 08
To Next Page
Loading...
