English - 1
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Rotatable top handle with pushbutton
2 Stroke rate preselection thumbwheel
(GST 85 PE/GST 85 PAE)
3 Allen key
4 On/Off switch
5 Vacuum connection (GST 85 PAE)
6 Switch for sawdust blowing device
7 Lever for adjustment of pendulum action
8 Base plate (GST 85 P/GST 85 PE)
8 Base plate with mit interior extraction
channel (GST 85 PAE)
9 Stroke rod
10 Guide roller
11 Saw blade*
12 Cover guard (GST 85 PAE)
13 Contact protector
14 Scale for mitre angle
15 Screw
16 Angle gauge**
17 Thread
18 Positioning pin/marking
19 Splinter guard
20 Screw for replaceable base-plate cover
(GST 85 PAE)
21 Replaceable base-plate cover
(GST 85 PAE)
22 Slider (GST 85 PAE)
23 Circle cutter/parallel guide*
* Not all of the accessories illustrated or described are
included as standard delivery.
**Commercially available (not included in the delivered
items)
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
Tool Specifications
Jigsaw GST 85 P
PROFESSIONAL
GST 85 PE
PROFESSIONAL
Article number 0 601 584 1.. 0 601 584 6..
Jigsaw GST 85 PAE
PROFESSIONAL
Article number 0 601 584 8..
Rated input power [W] 580 580
Output power [W] 350 350
Stroke rate at no load [spm] 3 100 500 – 3 100
Stroke [mm] 26 26
Stroke rate preselection – ●
Orbital action ● ●
Sawdust Blower Device ● ●
Cutting capacity, max.
Wood [mm] 85 85
Aluminium [mm] 20 20
in non-alloy steel [mm] 10 10
Bevel cuts (left/right) [°] 0 – 45 0 – 45
Weight according to EPTA-Procedure
01/2003
[kg] 2.4 2.4
Protection class / II / II
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Machine Elements
Intended Use
2 609 931 878.book Seite 1 Donnerstag, 4. November 2004 8:06 08
12 • 2 609 931 878 • TMS • 27.10.04
To Next Page
Loading...
