23
Conversion to natural gas
This appliance is shipped from the factory for use with
natural gas. If the appliance has been converted to
propane gas before, you have to convert it to natural gas
again.
Check the orifices for the right nozzles and, if required,
replace them. See "Replacing the main control nozzles".
Adjust the minimum gas flow. See "Setting the minimum
gas flow". The optimum setting is achieved when the
height of the small flame is approx. 1/8" (3to 4 mm).
Set the pressure regulator for natural gas. Turn the
spring plate the other way around as shown in "Setting
the pressure regulator for propane gas".
Save the orifices removed from the appliance for future
use.
Technical Service
Contact our Technical Service Department if your
appliance needs repair. Our Customer Service (see
below) will be happy to supply you with details how to
obtain a service repair.
Please find the contact data of all countries in the
enclosed customer service list.
To book a service visit and product advice
How to Obtain Warranty Service
To obtain warranty service for your Product, you should
contact Bosch Customer Service at 1-800-944-2904to
schedule a repair.
Model (E) number and FD number
When you contact our service, please have the Model
(E) number and the FD number for your appliance
available.
You can find this information on the rating label
▯ on the back side of the appliance
▯ on the underside of the projecting control panel
Questions? Please contact us. We look forward to
hearing from you.
US 8009442904
toll-free
0DLQ6WUHHW6XLWH
,UYLQH&$
ZZZERVFKKRPHFRP
To Next Page
Loading...
