Bosch HII8047C - 8.6 FlexInduction cooking zone; 8.6.1 Cookware recommendations for the flexible cooking zone; 8.6.2 Using the flexible zone as two separate cooking zones; 8.6.3 Activating the FlexInduction function

Cooktop operation en-us
29
Chicken breast
1
5.0-6.0
Bacon 6.0-7.0
Eggs 5.0-6.0
Fish 5.0-6.0
Pancakes 6.0-7.0
1
Turn the food several times.
Deep-fat frying
Fry in 1-2qt. oil without a lid.
Deep-frozen foods, e.g. chicken
nuggets (0.5lb per serving)
8.0-9.0
Other, e.g. donuts (0.5lb per serving) 4.5-5.5
Keep warm
Tomato sauce 1.5
8.6 FlexInduction™ cooking zone
You can use the flexible cooking zone as one large
cooking zone, or as two separate cooking zones.
The flexible cooking zone has 4induction elements, which
are controlled independently from each other. When you
use the FlexInduction™ function, only the area that is
covered by cookware is activated.
Cookware recommendations for the flexible
cooking zone
Place the cookware in the middle of the cooking zone.
This assures optimal pot detection and heat distribution.
Flexible cooking zone as one large cooking zone
Possible
cookware
positions
Explanation
The cookware diameter is smaller than
or equal to 5⅛" (13 cm).
Place the cookware on one of the four
positions shown in the illustration.
The cookware diameter is larger than
5⅛" (13 cm).
Place the cookware on one of the three
positions shown in the illustration.
The cookware takes up more than one
of the positions shown above.
Position the cookware starting on the
upper or lower edge of the flexible
cooking zone.
Flexible cooking zone as two separate cooking zones
Possible
cookware
positions
Explanation
The front and rear cooking zones each
have two induction elements. They can
be used independently of each other.
Use only one item of cookware on each
cooking zone.
Select the required heat setting for
each of the cooking zones.
Using the flexible zone as two separate cooking
zones
▶ Make the settings for each cooking zone independently.
Note:The flexible cooking zone operates as two separate
cooking zones as a default. If you want the
FlexInduction™ function to be activated automatically you
can adjust the basic settings.
Activating the FlexInduction™ function
1. Place the cookware on the flexible cooking zone.
2. Select one of the two cooking zones that belong to the
flexible cooking zone.
3. Press flex join/split.
a lights up.
4. Set the power level.
a The power level is displayed on both cooking zone
displays.
Note:If both cooking zones are set to different power
levels before being linked, both cooking zones switch to 0.
Changing the power level for the flexible cooking
zone
1. Select one of the two cooking zones of the flexible
cooking zone.
2. Change the power level in the settings area.
Adding cookware to the flexible cooking zone
You can add a piece of cookware while you are cooking
on the flexible cooking zone.
1. Place the additional piece of cookware on the flexible
cooking zone.
2. Select one of the two cooking zones of the flexible
cooking zone.
3. Press flex join/split twice.
a The additional cookware is detected.
a The power level stays the same.
Note:If you remove the cookware from the cooking zone,
or lift it up, the cooking zone begins to search for the
cookware. The power level stays the same.
Deactivating the FlexInduction™ function
1. Select one of the two cooking zones of the flexible
cooking zone.