Bosch HII8047C - 8.11 ShortBoost; 8.11.1 Restrictions for using the ShortBoost function; 8.11.2 Activating ShortBoost; 8.11.3 Deactivating ShortBoost

en-us Cooktop operation
32
¡ If you have set a power level before activating the
function, this power level is used automatically after the
function has been deactivated.
8.11 ShortBoost
With this function you can heat cookware faster than with
power level ⁠.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Recommendations for using this function:
¡ Always use cookware that has not been pre-heated.
¡ Use cookware with a flat base.
¡ Do not use cookware with a thin base.
¡ Never leave empty cookware, oil, butter or lard to heat
up unattended.
¡ Do not place a lid on the cookware.
¡ Place the cookware on the center of the cooking zone.
¡ Ensure that the diameter of the base of the cookware
matches the size of the cooking zone.
¡ Refer to the information on cooking with induction for
information on the type, size and positioning of the
cookware.
Restrictions for using the ShortBoost function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available, and blink on the
display of the selected cooking zone. The power level
is set automatically.
Activating ShortBoost
WARNING
Oil and fat heat up quickly with the ShortBoost function.
Overheated oil and fat may ignite.
▶ Never leave the cooktop unattended during cooking.
1. Select the desired cooking zone.
2. Press speed boost twice.
a ⁠. lights up on the cooking zone display.
Deactivating ShortBoost
The function is turned off automatically after 30seconds.
You can turn it off manually before that.
1. Select the desired cooking zone.
2. Press speed boost.
a ⁠. goes out.
a The cooking zone switches to power level ⁠.
8.12 Keep warm
This function is suitable for melting chocolate or butter and
for keeping food warm.
CAUTION
Food might spoil when left standing for too long.
▶ To maintain food safety, do not keep food warm for
more than one hour after cooking.
Activating the keep warm function
1. Select the cooking zone.
2. Press keep warm.
a lights up on the cooking zone display.
Deactivating the keep warm function
1. Select the cooking zone.
2. Press keep warm.
a goes out.
a The cooking zone turns off and the residual heat
indicator lights up.
8.13 AutoChef® - 800Series only
With the AutoChef® function, a sensor controls the
temperature of the pan. You can fry while the pan
maintains the selected temperature.
Advantages when using the AutoChef® function:
¡ The cooking zone only continues heating for as long as
this is necessary to maintain the temperature. This
saves energy and prevents the oil or fat from
overheating.
¡ The frying function reports when the empty frying pan
has reached the optimum temperature for adding oil
and then for adding the food.
General notes for using the AutoChef® function:
¡ Do not place a lid on the frying pan. This will prevent the
function from activating correctly. Use a splatter guard
to prevent fat from spitting out.
¡ Use suitable oil or fat. If you are using butter,
margarine, cold-pressed olive oil or lard, use
temperature setting 1 or 2.
¡ Never leave fat or oil unattended while you are heating
it.
¡ If the cooking zone is a higher temperature than the
cookware or vice versa, the cooking sensor is not
activated correctly.
WARNING
If the frying sensor is not working properly, overheating
may result causing smoke and damage to the pan or fire.
WHEN COOKING WITH THE FRYING SENSOR
FUNCTION OBSERVE THE FOLLOWING
▶ Always use a sensor frying pan.
▶ Always put the pan in the center of the cooking zone.
▶ Do not place a lid on the pan.
▶ Never leave hot fat or oil unattended.