Bosch HII8057C - PowerMove Function

Cooktop operation en-us
27
Cookware Materials Properties
Cookware bases with aluminum content. These reduce the ferromagnetic area, which
means that less power is emitted to the
cookware. This cookware may not be
sufficiently detected or may not be detected at
all, and therefore does not heat sufficiently.
Not suitable Cookware made from normal thin steel, glass,
clay, copper or aluminum.
Notes
¡ Do not use adapter plates between the hob and the
cookware.
¡ Do not heat up empty cookware and do not use
cookware with a thin base, as this may become very
hot.
8.2 Turning the cooktop on
▶ Press the cooktop main switch.
a The indicator above the cooktop main switch turns on.
a The symbols for the cooking zones and functions
available at this time light up.
a lights up in the cooking zone displays.
8.3 Turning the cooktop off
▶ Press and hold the cooktop main switch until all
indicators go out.
a All cooking zones are turned off.
a The residual heat indicators remain lit until the cooking
zones have cooled off sufficiently.
Note:The cooktop turns off automatically when all the
cooking zones have been turned off for more than
20seconds.
8.4 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting Power level
lowest power level
highest power level
Intermediate setting for all power levels
Depending on your model, the intermediate
level is displayed on the cooking zone display
¡ as a dot, for example . lights up when you
set the intermediate level between power
level and ⁠.
¡ as . , for example ⁠.
Note:The cooktop may temporarily reduce the power
automatically to protect the fragile parts of your appliance
and to prevent the appliance from producing excess noise.
Setting the power level - 800 Series
Requirement:The cooktop is turned on.
1. Place the cookware on the cooking zone.
2. Press to select the cooking zone ⁠.
a lights up in the cooking zone display.
a lights up under the cooking zone display.
3. Set the power level in the settings area
Press to set an intermediate level.
Setting the power level - Benchmark® Series
Requirement:The cooktop is turned on.
1. Place the cookware on the cooking zone.
2. Press or to select the cooking zone ⁠.
a lights up in the cooking zone display.
3. Set the power level in the settings area
Press to set an intermediate level.
Changing the power level
1. Select the desired cooking zone.