Bosch HII8057C - 8.8.1.1 Changing or canceling the kitchen timer - 800 Series; 8.8.2 Setting the kitchen timer - Benchmark Series; 8.8.2.1 Changing or canceling the kitchen timer - Benchmark Series; 8.9 Count-up timer

Cooktop operation en-us
31
a When the time has elapsed, a beep sounds.
a and blink in the timer display.
3. Press Timer to stop the signals. After 10seconds the
signals stop automatically.
Changing or canceling the kitchen timer - 800 Series
1. Press Timer.
2. Set the desired time in the settings area.
To cancel the kitchen timer, set the time to ⁠ ⁠.
Setting the kitchen timer - Benchmark® Series
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
▶ When using a timer, always supervise the cooktop.
▶ Do not allow anything to boil over or burn.
1. Press kitchen timer.
a lights up in the timer display.
a The indicator above kitchen timer lights up.
2. Set the desired time in the settings area.
3. Press kitchen timer to confirm.
a The time starts to count down after a few seconds.
a When the time has elapsed, a beep sounds. blinks in
the timer display.
a The indicator above kitchen timer blinks.
4. Press any key to turn off the signals. After 10seconds
the signals stop automatically.
Changing or canceling the kitchen timer - Benchmark
Series
1. Press kitchen timer.
2. Set the desired time in the settings area.
To cancel the kitchen timer, set the time to ⁠ ⁠.
3. Press kitchen timer to confirm.
8.9 Count-up timer
The Count-up timer displays the time that has elapsed
since activating the function.
The Count-up timer works independently from the cooking
zones and from other settings. This function does not
automatically switch off a cooking zone.
Starting the Count-up timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
▶ When using a timer, always supervise the cooktop.
▶ Do not allow anything to boil over or burn.
▶ Press count up timer.
a lights up on the timer display.
a The indicator above count up timer lights up.
a The timer starts to count up.
Canceling the Count-up timer
1. Press count up timer.
a The timer stops running.
2. Press count up timer again.
a The timer is cleared and turns off.
8.10 SpeedBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily
increases the top output of the selected cooking zone.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Restrictions for using the SpeedBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available, and blink on the
display of the selected cooking zone. The power level
is set automatically.
800 Series
Benchmark® Series
Activating SpeedBoost®
1. Select the desired cooking zone.
2. Touch speed boost/Speed Boost.
a lights up in the cooking zone display.
Deactivating SpeedBoost®
1. Select the required cooking zone.
2. Press speed boost/Speed Boost.
a goes out.
a The cooking zone switches to power level ⁠.
Notes
¡ In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.