Bosch HII8057C - PowerManager Function; Induction Cooking

Cooktop operation en-us
33
Suitable pans for AutoChef®
A suitable sensor frying pan for the AutoChef® function is
available as an optional accessory.
You can purchase suitable sensor frying pans from
Customer Service, in our online shop www.bosch-
home.com/us/shop or in specialized stores. Always
indicate the relevant reference number.
Reference number Special accessory
HEZ390210 Sensor frying pan Ø6" (15cm)
HEZ390230 Sensor frying pan Ø8¼" (21cm)
The sensor frying pans have a non-stick coating, which
means that very little oil is needed for frying.
Conventional frying pans
CAUTION
When using a conventional frying pan observe the
following notes.
▶ The AutoChef® function has been configured
specifically for our system pans.
▶ Other frying pans may overheat. They may reach a
temperature above or below the selected frying level.
Try the lowest frying level first and then change it
according to your requirements.
▶ Make sure that the diameter of the base of the frying
pan corresponds to the size of the cooking zone. Place
the pan in the center of the cooking zone.
Frying levels
The AutoChef® function offers 4 frying levels.
Frying
level
Temperature Suitable for
min Low Chicken breast, omelettes, french toast, hash browns, fried food in butter or olive oil
low Medium-low Thick pan-fried foods such as pork chop, hamburger, pancakes
med Medium-high Veal cutlet, ground meat, thin slices of meat, vegetables
max High Steaks medium-rare, fried boiled potatoes
Setting AutoChef®
CAUTION
Hot oil or fat may ignite.
▶ Never leave hot fat or oil unattended.
▶ Do not place a lid on the frying pan. This will prevent the
AutoChef® function from activating correctly. Use a
mesh splatter guard to prevent fat from spitting out.
▶ Only use fat or oil that is suitable for frying.
▶ When you are using butter, margarine, olive oil or lard,
select frying level min.
▶ Do not use AutoChef® for boiling.
Requirements
¡ The cooktop is turned on.
¡ You have selected a suitable frying level from the frying
levels chart.
1. Place the empty frying sensor pan in the center of the
cooking zone with the AutoChef® feature.
2. Select the cooking zone.
3. Press Auto Chef.
a lights up on the cooking zone display.
a The frying levels light up.
4. Select the desired frying level with the number keys in
the settings area.
a blinks.
a The preheat icon lights up.
a When the set frying temperature is reached a beep
sounds and stops blinking.
a goes out.
5. Add the frying oil to the pan.
6. Add the ingredients.
Turn the food over as usual to avoid burning.
Turning AutoChef® off
1. Select the cooking zone.
2. Press Auto Chef.
8.14 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
▶ water spilled during cleaning
▶ food that has overflowed
▶ objects being placed on the panel lock touch key.
Activating the panel lock
Requirement:The cooktop is turned off.
▶ Touch panel lock/Panel Lock for 4seconds.
a The indicator over the panel lock key lights up for
10seconds.
a The control panel is locked.
Deactivating the panel lock
Requirement:The cooktop is turned off.
▶ Touch panel lock/Panel Lock for 4seconds.
a The control panel is unlocked.