Bosch HMV3053C Use And Care Manual

Troubleshooting en-us
45
Issue Cause and troubleshooting
There are colored
coatings (blue, yel-
low, brown) inside
the appliance or on
stainless steel dish-
ware that are diffi-
cult or impossible to
remove.
The formation of films is due to substances con-
tained in vegetables (cabbage, celery, potatoes,
noodles, etc.) or tap water (manganese).
▶ Clean the appliance.
You can remove coatings with Mechanical
cleaning → Page34 or a machine cleaning
product. It may not always be possible to com-
pletely remove coatings but they are harmless
to health.
The formation of films is due to metal components
on silver or aluminum dishware.
▶ Clean the appliance.
You can remove coatings with Mechanical
cleaning → Page34 or a machine cleaning
product. It may not always be possible to com-
pletely remove coatings but they are harmless
to health.
There are colored
deposits (yellow, or-
ange, brown) that
are ey to remove in-
side the appliance
(mainly at the bot-
tom).
The formation of films is due to ingredients of
food remnants and tap water (limescale), "soap-
like".
1. Check the setting of the water softening sys-
tem.
→ "Setting the water softening system",
Page20
2. Add special salt.
3. If you are using combined detergents (tabs),
activate the water softening system.
Follow the information on detergents.
Plastic parts inside
the appliance are
discolored.
Plastic parts inside the appliance may become
discolored over the life of the dishwasher.
▶ Discoloration may come about and will not im-
pair functioning of the appliance.
Plastic parts are dis-
colored.
Dishwashing temperature is too low.
▶ Select a program with a higher dishwashing
temperature.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
▶ Only remove large remnants of food and do not
pre-rinse dishware.

Bosch HMV3053C Specifications

General

Brand	Bosch
Model	HMV3053C
Category	Dishwasher
Language	English