Bosch ICP-AMAX4-P2-EN - Page 13

COPY DATA TO KEY
FUNCTION VIEW
FAULT ANALYSIS
RF SETTING
RF RECEIVER
RF SENSOR DIAGNOSE
CLR ALL RF DEVICES
SIREN SETTINGS
ZONE FUNCTION
QUICK ARM ONLY */#
INSTALLER ACCESS
EVENT RECORD COUNT
SYSTEM SETTING
ADD/DELETE ZONE
PULSE COUNT DURAT.
RING TIMES
CODE SETTING
RPC IP/PORT/DHCP
INSTALLER MENU
COM+REPORT SETTING
RECEIVER SETTING
REPORT SETTING
RF LOW BATT REPEAT
SIREN BEEP AR/DIS
ADDRESS PROGRAM
COPY DATA TO PANEL
ADDRESS/KEY PROGR
RF DEVICE MANAGER
RF USER
RF REPEATER DIAGN.
RF REPEATER
RF JAM DETECT LEV.
RF KEYFOB PANIC AL
RF SUPERVISION
OUTPUT SETTINGS
RF PARA. SETTING
FORCE ARM FAULT/TA
FW VERSION
OUTPUT SETTING
SYS TAMPER INDIC.
DATE/TIME
FACTORY DEFAULT
LANGUAGE VERSION
KP 2 BUTTON ALARM
KP TONE/LOCKOUT
FUNCTION SETTING
FAULT CONFIG
KEYPAD AREA
AREA TIMING
COMMON AREA
CROSS TIMER
ZONE SETTING
TEST REPORT DURAT.
DUAL IP
REMOTE ACCESS
DOMESTIC/CALLBACK
INSTALLER CODE
CODE PERMISSIONS
KP/AREA SETTING
CODE LENGTH
USER CODE
Figure 4.1: Menu Structure
!
Warning!
Programming parameters must be set within the value range in the programming address.
Otherwise, the system will turn to indeterminate status.
AMAX panel 4000 / AMAX panel 4000
EN
Configuration | en 13
Bosch Sicherheitssysteme GmbH Quick Start Guide 2013.07 | 03 | F.01U.267.113