Keypad 2 Button Alarm
Address 0141 Address Default
0 = disabled, 1 = enabled 0141 0
Phone Line Monitor
Address 0142 Address Default
0 = disabled, 1 = enabled 0142 0
VDS-A
EN=1
Beep For Warning Devices
Address
0143 Address Default
0 = disabled, 1 = enabled 0143 1
Ring Count
Address
0144 Address Default
0 = Panel does not answer
1 - 13 = Number of rings until the control panel responds
14 = Call the control panel and allow the phone to ring no
more than twice and hang up. Wait a minimum of 8 sec
and call the control panel again. The control panel
answers on the first ring.
15 = Call the control panel and allow the phone to ring no
more than four times and then hang up. If you call again
within 45 sec, the control panel answers the call on the
first ring.
0144 14
Remote Programming
Address
0145 Address Default
0 = disabled, 1 = enabled 0145 1
VDS-A=0
Callback Telephone Number
Address
0146 - 0161 Address Default
See Telephone Programming Parameters, page 26 0146 - 0161 15
Remote PC Setting
Address 0162 - 0179
Address Default
RPC IP No 0162 - 0173 15
RPC Port Number 0174 - 0178 15
Control Panel DHCP Update Time (hours) 0179 15
RPC is the remote programming computer equipped with remote programming software.
AMAX panel 4000 / AMAX panel 4000
EN
Configuration | en 23
Bosch Sicherheitssysteme GmbH Quick Start Guide 2013.07 | 03 | F.01U.267.113
To Next Page
Loading...
