Bosch ICP-AMAX4-P2-EN - Page 67

B 426 or DX 4020 or DX
4020G (only 1):
– 2
DX2010: – 6
DX 4010: – 1
RF Receiver: – 1
RF Repeater: – DSRF = 0, Radion = 8
RF Sensors: – 64
RF Keyfobs: – DSRF = 24, Radion = 128
– Power:
Power Supply Type: – EN = A
Transformer: – 230V Input/18VAC 50VA Fuse=1A
AC Input: – AC Input Voltage: 195 VAC to 253 VAC
– Line Voltage Frequency: 50 Hz
DC Output: – maximum current for all components 2000mA
– max current for all components Battery 7Ah standby
12h (recharge Batt 80% in 72h) = 550mA
– max current for all components Battery 17Ah standby
12h (recharge Batt 80% in 72h) = 1500mA
– max current for all components Battery 17Ah standby
36h (recharge Batt 80% in 24h) = 480mA
Aux 1(+12V/GND) Output: – Nominal Output Voltage under AC line input: 13,8 VDC
+3% / -5%
– Output Voltage Range under AC line input: 13.11 VDC
to 14.2 VDC
– 900mA maximum
– Vpp (max) 675mV
Aux 1(+12V/GND) Output: – Nominal Output Voltage under AC line input: 13,8 VDC
+3% / -5%
– Output Voltage Range under AC line input: 13.11 VDC
to 14.2 VDC
– 900mA maximum
– Vpp (max) 675mV
Option Bus 1: – Nominal Output Voltage under AC line input: 13,8 VDC
+3% / -5%
– Output Voltage Range under AC line input: 13.11 VDC
to 14.2 VDC
– 900mA maximum
Option Bus 2: – Nominal Output Voltage under AC line input: 13,8 VDC
+3% / -5%
– Output Voltage Range under AC line input: 13.11 VDC
to 14.2 VDC
– 900mA maximum
AMAX panel 4000 / AMAX panel 4000
EN
Technical Data | en 67
Bosch Sicherheitssysteme GmbH Quick Start Guide 2013.07 | 03 | F.01U.267.113