Easy Series (ICP-EZM2) | Installer Guide | 7.0 Reference Materials
.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01 69
Part 68
This equipment complies with Part 68 of FCC rules. A label contains, among other information, the FCC
registration number and ringer equivalency number (REN). If requested, this information must be provided to
the telephone company.
The Bosch Security Systems Easy Series Intrusion Control Panel is registered for connection to the public
telephone network using an RJ38X or RJ31X jack.
The REN determines the number of devices that can be connected to the telephone line. Excessive REN’s on
the telephone line might result in the devices not ringing in response to an incoming call. In most, but not all
areas, the sum of the REN’s should not exceed five. To determine the number of devices that can be
connected to the telephone line, contact the telephone company for the maximum REN for the calling area.
The telephone company notifies you if this equipment harms the telephone network. If advance notice is not
practical, the telephone company notifies the customer as soon as possible. Also, you are advised of your right
to file a complaint with the FCC if you believe it is necessary to do so.
The telephone company might make changes in its facilities, equipment, operation, or procedures that could
affect the operation of this equipment. If this happens, the telephone company provides advance notice so you
can make the necessary modifications for maintaining uninterrupted service.
If you experience trouble with the Easy Series Intrusion Control Panel, contact Bosch Security Systems
Customer Service for repair and warranty information. If the trouble harms the telephone network, the
telephone company might request that you remove the equipment from the network until the problem is
resolved. User repairs must not be made, and doing so voids the user’s warranty.
This equipment cannot be used on public coin service provided by the telephone company. Connection to
party line service is subject to state tariffs. Contact your state public utilities commission for more information.
• FCC Registration Number: US:ESVAL00BEZ1; Ringer Equivalence: 0.0B
• Service Center: Contact your Bosch Security Systems representative for the location of your service
center.
7.7.3 Industry Canada
This product meets the applicable Industry Canada technical specifications.
The ringer equivalence number (REN) for this terminal equipment is 0.0. The REN assigned to each terminal
equipment indicates the maximum number of terminals allowed to be connected to a telephone interface. The
termination of an interface can consist of any combination of devices subject only to the requirement that the
sum of the REN of all devices does not exceed five.
7.7.4 SIA
Programming Requirements
To comply with ANSI/SIA CP-01 False Alarm Reduction, set these programming items as follows:
Programming Item Item Number Default Page Reference
Intrusion Abort Window 110 30 sec 37
Intrusion Cancel Window 112 5 min 37
Exit Delay 126 60 sec 38
Entry Delay 127 30 sec 38
Exit Time Restart 128 1 38
Swinger Bypass Count 131 1 39
Auto Protection Level 132 1 39
* The middle digits = the point number. For example, “01” = Point 1, and “32” = Point 32.
To comply with ANSI/SIA CP-01 False Alarm Reduction, by default, this system:
• Sends Intrusion Alarm Verified and Exit Error reports
• Sends a Recent Closing report for any alarm that occurs within two min of the end of Exit Delay
• Includes a Fire Verified point type option that is disabled by default
To Next Page
Loading...
