Overview
This document contains instructions for a trained installer to properly install, configure, and
operate the Easy Series control panel, and all optional peripheral devices.
You will install and configure the system using the figures starting in System Components and
Wiring, page 18 and the information in System Installation and Configuration, page 25. The
sections following Sections 1 and 2 provide supporting details for installation, configuration,
testing, and support.
Installation Workflow
To properly install, configure, and test the system, use the following workflow:
Step Description Page
1. Plan the
Installation
Identify suitable locations for system components in the
installation site.
Plan the Installation,
page 25
2. Install the
Hardware
Install all system components. Install System
Components, page 25
4. Configure the
System
Enroll wireless devices into the system, perform basic
programming for the system, and add users to the system.
Configure the System,
page 32
5. Program the
System
Update the system with expert programming. Programming Access
Options, page 38
6. Test the System Perform a full system test. Ensure that the central monitoring
station received test reports.
Test the System, page
66
Table 2.1: Installation Workflow
2
2.1
Easy Series Control Panel Overview | en 17
Bosch Security Systems, Inc. System Reference Guide 2014.09 | 01 | F.01U.306.221
To Next Page
Loading...
