Bosch ICP-EZM2 - Expert Programming

Expert Programming
Each category consists of several related programming items. Each programming item is
assigned a three- or four-digit number.
For No. 4 in the next figure, perform these steps:
1. Enter an expert programming item number. For example, 201, Phone Line Supervision.
2. Enter the desired value using your phone's keypad. For example, press [1] to enable
phone line supervision.
3. Repeat Steps 1 and 2 to configure other programming items, or press [#] to exit Expert
Programming.
1
2
3
4
5
6
7
#
System
Maintenance
User Menu
Expert
Programming
Basic
Programming
Two-Way
Voice Session
Custom
Messages
Programming
Key
Exit installer menu and end phone session.
Installer passcode
4-digit default: 5432
6-digit default: 543211
Installer
Phone
Menu
The following sections list programming items, item numbers, possible selections, and default
values. Record custom values in the Entry column next to the respective default value.
ROM Firmware Version Items
Programming Item Item
Number
Description
Control Panel Firmware Version 090 System announces the control panel’s firmware
version.
Control Center 1 Firmware Version 091 System announces the control center’s firmware
version.
Control Center 2 Firmware Version 092
Control Center 3 Firmware Version 093
Control Center 4 Firmware Version 094
5.2
5.2.1
Easy Series Control Panel Programming | en 47
Bosch Security Systems, Inc. System Reference Guide 2014.09 | 01 | F.01U.306.221