Bosch ICP-EZM2 - Page 52

Programming Item Item
Number
Selections Manuf.
Default
PSTN or IP Connection 202 0 = PSTN telephone line
1 = B426 Ethernet communication module
Voice Format Repeat Count 203 1 to 15 3
Voice Format Message Delivery
Attempts
204 1 to 5 in increments of 5 sec 1
Dial Tone Detect 205 0 = Do not wait for dial tone.
1 = Wait for dial tone.
1
Route 1 Primary Destination 206 Enter a phone number (up to 32 digits) or IP address
(000.000.000.000 to 255.255.255.255) for each
destination:
0 to 9 = [0] to [9]
* = [*][*]
# = [*][#]
Pause = [*][1]
Exit with save = [#]
Exit without save = [#][#]
Press [#] twice within two seconds to exit without
saving your entry.
Disable phone number = [0][#]
Disable IP address = 240.0.0.0
0
Route 1 Backup Destination 207 0
Route 2 Primary Destination 208 0
Route 2 Backup Destination 209 0
SMS Service Provider Number 210 Up to 32 digits. 0
Format for Route 1 Primary
Destination
211 0 = Disabled
1 = Contact ID
2 = SIA
3 = Voice
4 = SMS Text
5 = Fast Format
6 = Network (requires a 4-digit account number)
0
Format for Route 1 Backup
Destination
212 0
Format for Route 2 Primary
Destination
213 0
Format for Route 2 Backup
Destination
214 0
Call Waiting Disable 215 Enter a 3-digit string.
* = [*][*]; # = [*][#]
0
Emergency Call Override Number 216 Enter a 3-digit emergency number, such as 911. 000
Emergency Call Override Number
Delay
217 0 to 60 min 5
Auto Detect Pulse Dial 218 0 = Tone dialing only
1 = Auto Detect Pulse or Tone
0
Phone Answer Ring Count 222 1 to 255 rings
Enter 11 to bypass an answering machine.
10
52 en | Programming Easy Series Control Panel
2014.09 | 01 | F.01U.306.221 System Reference Guide Bosch Security Systems, Inc.