EasyManua.ls Logo

Bosch ICP-SOL2-P - Page 33

Bosch ICP-SOL2-P
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Location Default New Item Location Default New
Time Base 0685 0 Time Base 0691 0
Time Base Multiplier 0686 0 Time Base Multiplier 0692 0
Time Base Multiplier 0687 0 Time Base Multiplier 0693 0
For output item options, refer to below Output Item Options.
Item Option
Event Code 0 0 = Reserved
0 1 = System armed
0 2 = System disarmed
0 3 = Armed in STAY mode
0 4 = Armed in AWAY mode
0 5 = Pre-arming alert
0 6 = Exit Warning (all zones sealed) and
entry warning
0 7 = Exit Warning
0 8 = Exit Warning finished
0 9 = Kiss-off after end of Exit Time
0 10 = Reserved
0 11 = Entry warning
0 12 = Entry warning and day alarm resetting
0 13 = Exit warning and entry warning and
day alarm resetting
0 14 = Day alarm resetting
0 15 = Day alarm latching
1 0 = Day alarm enabled
1 1 = Telephone line fail
1 2 = Kiss-off received
1 3 = Power Supply fail
1 4 = AC fail
1 5 = Low battery
1 6 = Output 1 to 3 fail
1 7 = Sensor watch alarm
1 8 = Codepad medical alarm
1 9 = Codepad fire alarm
1 10 = Codepad panic alarm
1 11 = Codepad duress alarm
1 12 = Access denied (code retries)
1 13 = Reserved
1 14 = Horn speaker (output 1 only)
1 15 = Siren running
Event Code 2 0 = Strobe
2 1 = Silent alarm
2 2 = Alarm in STAY mode
2 3 = Alarm in AWAY mode
2 4 = System fault
2 5 = Fire alarm (resetting)
2 6 = Fire alarm (latching)
2 7 = Fire alarm (verification)
2 8 = Remote control 1
2 9 = Remote control 2
2 10 = Remote control 3
2 11 = Radio control output 1
2 12 = Radio control output 2
2 13 = Radio control output 1- not in AWAY
Mode
2 14 = Radio control output 2- not in AWAY
Mode
2 15 = Communications fail after 3 attempts
3 0 = Communications fail
3 1 = Dialer disabled
3 2 = Dialer active (on-line)
3 3 = Ring detect
3 4 = Codepad/Keyfob panic
3 5 = Mimic zone 1
3 6 = Mimic zone 2
3 7 = Mimic zone 3
3 8 = Mimic zone 4
3 9 = Mimic zone 5
3 10 = Mimic zone 6
3 11 = Mimic zone 7
3 12 = Mimic zone 8
3 13 = Reserved
3 14 = Reserved
3 15 = Reserved
Control Panel Programming Parameters | en 3
Bosch Security Systems, Inc. Quick Reference Guide 2014.06 | 02 | F01U298027

Table of Contents

Other manuals for Bosch ICP-SOL2-P

Related product manuals