Callout --Description Callout --Description
1 – Socket for telecom lead connect 8 – Bosch SDI2 Bus
2 – Receiver interface connection 9 – Battery input
3 – Tamper switch 10 – Plug pack input (Bosch TF008)
4 – Zone 5-8 termination strip
( Zone 5 – 8 and Zone 13 – 16 for ICP-SOL3-
P )
11 - Bosch SDI2 Bus
5 – AUX power 12 – Relay contact select
(select output GND or AUX as
shown)
6 – Zone 1-4 termination strip
( Zone 1 - 4 and Zone 5 - 8 for ICP-SOL2-P;
Zone 1 – 4 and Zone 9 – 12 for ICP-SOL3-P )
13 – LED indicator
7 – Output termination strip 14 – Default button
Table 5.5: Callout description
4 en | Appendices Control Panel
2014.06 | 02 | F01U298027 Quick Reference Guide Bosch Security Systems, Inc.
To Next Page
Loading...
