93
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
Chapter 19 Menu structure in EFAS
The following gure depicts the EFAS menu structure
Figure 73 — EFAS menu structure
Figure 73 is a representation of the menu structure in EFAS. Which of the menu items can be accessed depends on the operating
mode as set by inserting certain types of tachograph smart-card.
The annotations in the diagram have the following meanings:
*1) Before activation, only “Technical data” can be selected in the menu “Printout” or “Print preview”.
*2) Only available with inserted workshop card (mode CALIBRATION)
*3) Only available for the currently registered company
*4) Optionally available (depends on the device settings)
*5) Only available in the modes COMPANY or CALIBRATION
*6) Only with driver or workshop card inserted
*7) Only in the mode COMPANY and only if the inserted company card belongs to the company which activated the last
company lock and no vehicle registration number has yet been entered.
*8) Only in the mode COMPANY and only if the inserted company card belongs to the company which activated the last
company lock
*9) Only available with inserted workshop card (mode CALIBRATION) or EFAS is not activated.
*10) Only available with inserted control card
*11) Optionally available
To Next Page
Loading...
