Bosch Intellic EFAS-4.10 - EFAS Tachograph Card Readers

8
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
The individual keys have the following functions:
Key Meaning Description
Key for driver 1
Referred to in the text below as:
u
By briey pressing the button, the driver activity (working time, standby time and rest time) can
be selected for driver 1. The activity only changes after the key is released. Pressing the key for
at least 1.5 seconds when the vehicle is stationary requests the card to be ejected from slot 1.
Key for driver 2
Referred to in the text below as:
v
By briey pressing the button, the driver activity (working time, standby time and rest time)
can be selected for driver 2. The activity only cycles to the next one after the key is released.
Pressing the key for at least 1.5 seconds when the vehicle is stationary requests the card to be
ejected from slot 2.
OK key Referred to in the text below as: OK
When the vehicle is stationary: Calls the main menus and/or conrms any entries.
During a journey: Stores the current speed for individual speed monitoring
2
of the driver.
BACK key
Referred to in the text below as: 9
When the vehicle is stationary:
y Cancel a selected function within a menu / go back one menu level.
y Terminates a menu if pressed for approx. 1 second.
y Sets the local language for the display to English if held pressed for at least 5 seconds
when the standard display can be seen.
During a journey: Switches individually programmed speed monitoring o.
Control key
Referred to in the text below as: 
Selects the next menu item, switches the screen display
Control key
Referred to in the text below as: 
Selects the previous menu item, switches the screen display
2
4.3 Card readers
EFAS is tted with two card readers.
Figure 2 — Card readers
The card slot for the driver is on the left and for the co-driver on the right. Each card must be inserted all the way to the stop.
The cards are locked mechanically and normally they can only be removed electrically with the help of the application when the
vehicle is stationary. To remove jammed cards see section 11.2.
2 PersonalSpeedWarning: Can be programmed via EFAS Service Tool, see Settings
g
Warning